How to install and replace solid tires correctly from a solid tire factory tutor?

Solid tires are a type of tire that does not require inflation. Due to their advantages such as wear resistance and puncture resistance, they are widely used in some special occasions, such as forklifts and hand carts for stacking goods. Proper installation and replacement of solid tires are key to ensuring their service life and safety. Below, solid tire manufacturers will introduce the correct installation and replacement methods for solid tires.

1、 Installation of solid tires

1. Preparation work

Before installing solid tires, check for any damage or wear to the tires. If there is, the tire needs to be replaced first. In addition, check the wheels for rust or damage, and if so, repair or replacement is necessary. Check the compatibility of the tires and wheels to ensure that they match the size of the wheels.

2. Preparation before installation

Stabilize and park the vehicle on a flat surface, and secure it to prevent slipping or tilting during installation. Meanwhile, prepare the necessary tools such as wrenches, screwdrivers, etc.

3. Remove the old tire

Use a wrench or screwdriver to rotate the bolts or nuts on the old tire counterclockwise, loosen the fixed parts that hold the wheel, and then remove the old tire from the wheel. Pay attention to safety when loosening bolts or nuts.

4. Install new tires

Place the new solid tire on the wheel and ensure that the grooves on the tire align with the protrusions on the wheel. Use a wrench or screwdriver to tighten the bolt or nut clockwise to secure the tire to the wheel. When tightening, pay attention to the strength of the bolts or nuts and do not tighten them too much to avoid damaging the threads or wheels.

5. Check the installation of tires

After installation, check if the tire is securely installed and fully connected to the wheel. Check if the bolts or nuts are tightened. Then, gently rotate the tire to ensure that there is no abnormal rotational resistance or imbalance.

6. Cleaning and maintenance

After installation, clean the dust and dirt on the surface of the tires to ensure they are clean. As needed, professional tire cleaners can be used.

2、 Replacement of solid tires

1. Preparation work

Prepare the necessary tools, such as wrenches, screwdrivers, etc. Park the vehicle on a flat surface and secure it to prevent slipping or tilting during replacement.

2. Remove the old tire

Use a wrench or screwdriver to rotate the bolts or nuts on the old tire counterclockwise, loosen the fixed parts that hold the wheel, and then remove the old tire from the wheel. Pay attention to safety when loosening bolts or nuts.

3. Install new tires

Place the new solid tire on the wheel and ensure that the grooves on the tire align with the protrusions on the wheel. Use a wrench or screwdriver to tighten the bolt or nut clockwise to secure the tire to the wheel. When tightening, pay attention to the strength of the bolts or nuts and do not tighten them too much to avoid damaging the threads or wheels.

4. Cleaning and maintenance

After replacement, clean the surface of the tire of dust and dirt to ensure that the tire is clean. As needed, professional tire cleaners can be used.

It should be noted that solid tires need to be handled more carefully due to their lack of inflation function. When installing or replacing solid tires, do not use excessive force to avoid damaging the wheels or tires. Meanwhile, after installation, the tire should be tested for smooth rotation to ensure safety.

In summary, proper installation and replacement of solid tires require certain professional knowledge and skills. Only by correctly installing and replacing solid tires can the stability and safety of the vehicle be ensured. If you are not familiar with the installation and replacement of solid tires, it is recommended that you seek professional solid tire manufacturers or maintenance personnel to ensure safety and reliability.